EN4300 9,480lb (4.3T) 24V EN-Rated Recovery Winch – 34m Steel Wire Rope

EN4300 24V EN-Rated Recovery Winch with Steel Wire Rope

The Novawinch EN4300 is a professional 24V recovery winch with 9,480lb (4,300kg / approximately 4.3 tonnes) of rated line pull on the first rope layer. Designed for recovery trucks, car transporters, flatbed vehicles and other commercial installations, it combines a long steel wire rope with controlled, high-torque pulling performance.

This configuration includes 34m of 9.2mm steel wire rope, a four-way roller fairlead and a waterproof wired remote. A lighter EN4300 synthetic-rope version is also available.

Key Features

Designed for Professional Recovery Vehicles

The EN4300 is intended for demanding commercial installations where controlled pulling, extended rope capacity and documented winch performance are important. Its 24V electrical system suits recovery trucks and transport vehicles equipped with a compatible 24V battery and charging system.

The four-stage planetary gearbox provides a high 516:1 reduction ratio for controlled pulling under load. At its full first-layer rating of 9,480lb, the winch operates at approximately 1.3m/min and draws around 200A. With no load applied, line speed increases to approximately 3.2m/min with a current draw of around 50A.

34m Steel Wire Rope

The 34m × 9.2mm steel wire rope provides abrasion resistance and generous reach for recovery trucks, car transporters and flatbed installations. The supplied four-way roller fairlead guides the rope onto the drum and reduces contact with sharp mounting edges during angled pulls.

Steel wire rope should be inspected regularly for broken strands, flattening, kinks, corrosion and other damage. Wear suitable gloves whenever handling it. Read our guide to synthetic rope versus steel cable for more information about each rope type.

Rated Pull Across the Rope Layers

The stated 9,480lb rating applies to the first rope layer, where the winch produces its greatest pulling force. Available pull decreases as additional rope builds up on the drum, falling to approximately 6,300lb on the fourth layer.

Learn more in our guide to winch line pull and drum layers.

Installation Requirements

The winch measures approximately 642mm long, 215mm wide and 288mm high. It supports 254mm × 114.3mm and 254mm × 165.1mm mounting patterns, giving installers flexibility when designing a suitable load-rated mounting structure.

Installation should include correctly sized cabling, suitable electrical protection, secure battery connections and a mounting system engineered for the expected loads. The roller fairlead may require a separate fairlead mounting position rather than attaching directly to the winch body.

The 9,480lb figure describes pulling force, not maximum vehicle weight. Required capacity depends on vehicle mass, gradient, rolling resistance, surface conditions and the amount of rope remaining on the drum.

Safe Winching

The EN4300 is intended for pulling and vehicle recovery. It must not be used for lifting people or suspended loads. Vehicles and equipment must be secured during transport using separate, approved load restraints rather than relying on the winch rope or brake.

Free UK Delivery, Warranty and Support

The EN4300 comes with a Novawinch warranty and free UK delivery on eligible orders. See our delivery information for availability, order cut-off times and postcode restrictions.

If you need help confirming mounting compatibility, electrical requirements or the correct winch capacity, contact the Novawinch UK team before ordering.