GRT12000 12,000lb (5.4T) EN-Rated Hydraulic Winch – 30m Wire Rope

GRT12000 12,000lb EN-Rated Hydraulic Recovery Winch

The Novawinch GRT12000, previously known as the HEN12000, is an EN-rated hydraulic recovery winch developed for professional vehicle recovery, transport, industrial and specialist trailer applications. It provides 12,000lb (5,443kg / approximately 5.4 tonnes) of rated line pull on the first rope layer and is supplied with 30m of 12mm steel wire rope.

A multi-disc brake, dual-balance valve system, hardened planetary gearing and IP67 protection make the GRT12000 suitable for demanding installations where controlled pulling performance, dependable braking and resistance to adverse working conditions are essential.

Key Features

Built for Professional Recovery Work

The GRT12000 combines a 12,000lb first-layer line pull with a first-layer line speed of 21.3ft/min (6.5m/min). It operates at a working pressure differential of 13MPa (1,885psi) with an oil flow of 55L/min.

This combination of pulling capacity and controlled hydraulic operation makes it suitable for recovery trucks, fire and rescue vehicles, low-loaders, flatbed trailers, agricultural machinery and compatible industrial equipment.

Performance Across the Rope Layers

Rated line pull is highest on the first rope layer and reduces as additional rope builds up on the drum. At the same time, line speed increases. Winch selection should therefore be based on the layer-specific performance figures and the most demanding realistic operating conditions.

On the fourth layer, the GRT12000 provides 7,701lb (3,493kg) of rated line pull at 33.1ft/min (10.1m/min), with the full 30m rope capacity stored on the drum.

Multi-Disc Brake and Dual-Balance Valves

An automatic multi-disc brake helps hold the load when winching stops. The integrated dual-balance valve system supports controlled motor direction and reliable braking, while the hardened planetary gear train is designed for strength and long service life.

The winch is tested beyond its rated pulling capacity, and two rope-mounting holes provide a secure connection between the wire rope and drum.

30m Steel Wire Rope and Manual Clutch

This version is supplied with 30m of 12mm steel wire rope. Steel rope provides strong abrasion resistance for commercial recovery and industrial environments, while the four-layer drum provides a total rope capacity of 98.4ft (30m).

A manual clutch is fitted as standard. A pneumatic clutch, rope tensioner, recovery hook and roller fairlead may be available separately where required for the installation.

Hydraulic System Requirements

The GRT12000 requires a compatible hydraulic power supply capable of delivering the specified flow and working pressure. All hoses, fittings, valves, filtration and mounting components must be correctly rated for the installation.

An independent hydraulic oil supply incorporating a correctly specified relief valve is recommended. The winch must not be connected to a hydraulic system without suitable pressure relief. Read our guide to electric and hydraulic recovery winches if you are comparing the two systems.

Installation and Safety

Check the mounting structure, bolt pattern, available space, rope path and hydraulic connections before installation. The mounting surface must be capable of supporting the forces generated during operation.

This is a pulling winch and must not be used to lift people or suspend loads above people. Never operate the clutch while the rope is under load. Installation and operation should follow the supplied technical documentation.

Warranty, Delivery and Support

Every Novawinch winch includes a 2-year warranty and technical support from our UK team. Free UK mainland delivery is available on eligible orders; see our delivery information for current terms.

Browse our complete range of hydraulic winches and EN-rated hydraulic winches, or contact Novawinch UK for help confirming hydraulic compatibility and installation requirements.