Brand Product name
£15.99
ex.VAT
was
£15.99Thank you! Your submission has been received!
Oops! Something went wrong while submitting the form.
View now
Please wait
A heavy-duty hydraulic recovery winch delivering 9,980kg of first-layer pull, with a pneumatic clutch and rope tensioner. Includes a 2-year warranty and free UK delivery on eligible orders.




The Novawinch HW100 is a heavy-duty hydraulic recovery winch with 9,980kg (22,000lb) of rated single-line pull on the first rope layer. It is designed for commercial recovery trucks, fire appliances, defence vehicles, heavy plant and specialist chassis-mounted applications.
The HW100 combines a compact mounting arrangement with a pneumatic clutch, four-layer drum and standard rope tensioner. Its drum can accommodate up to 65m of 18mm wire rope.
At a nominal oil flow of 75L/min, the HW100 has a first-layer line speed of approximately 7m/min. Its working-pressure differential is 16MPa (2,320psi), and the recommended oil-flow range is 25–80L/min.
The installation requires an independent hydraulic oil supply with a correctly specified relief valve. The hydraulic system, hoses, fittings and controls must be selected for the vehicle, expected loads and operating duty. Installation should be completed by a suitably qualified hydraulic engineer.
The winch drum accommodates up to 65m of 18mm wire rope over four layers. Available pulling force decreases as rope builds up on the drum, from 9,980kg on the first layer to 7,034kg on the fourth layer. Line speed increases across the subsequent layers.
Where maximum pulling force is required, use the lowest practical rope layer while maintaining the minimum number of wraps specified in the operating instructions.
The HW100 is designed for demanding industrial and commercial work. Its combination of hydraulic power, rope capacity and compact mounting arrangement makes it suitable for recovery vehicles, fire appliances, heavy plant and specialist vehicle installations.
The HW series is specified as meeting EN 14492-1:2006 requirements. Where compliance forms part of a fleet, tender or contractual requirement, contact the Novawinch team for documentation relating to the exact supplied configuration.
The pneumatic clutch operates with an air pressure of 1–8 bar and a specified ventilation volume of 1L/min. Follow the operating instructions when engaging or disengaging the clutch.
Do not alter the specified wire-rope payout direction without approval, as the payout direction is linked to the winch configuration and braking system.
The drum is designed for 18mm wire rope with a maximum capacity of 65m over four layers. This HW100 is supplied without wire rope, hook or fairlead. Please contact us if you require these items as part of your installation.
The 22,000lb rating describes pulling force on the first rope layer. It is not a lifting capacity or maximum vehicle weight. The force needed for a recovery depends on the gradient, surface conditions, vehicle condition and whether its wheels can turn freely.
This winch is not intended for lifting people or for use as the sole means of securing a vehicle or load during transport.
The HW100 comes with a 2-year warranty and free delivery on eligible UK orders. Due to its size and weight, specialist transport arrangements may apply. See our delivery information or contact us before ordering.
Browse the complete HW hydraulic winch range, view our other hydraulic recovery winches or contact the Novawinch team for product and installation support. You can also call us on 0113 288 7766.