Brand Product name
£15.99
ex.VAT
was
£15.99Thank you! Your submission has been received!
Oops! Something went wrong while submitting the form.
View now
Please wait
A heavy-duty 10mm UHMWPE synthetic winch rope with an 8,600kg (19,000lb) minimum breaking load. Available in 29m or 34m black lengths, with a reinforced eye, metal thimble and protective sleeve. Free UK delivery on eligible orders.




This heavy-duty 10mm UHMWPE synthetic winch rope is a lightweight replacement line for compatible 4x4, off-road and vehicle-recovery winches. It has a minimum breaking load of 8,600kg (19,000lb) and is available in 29m or 34m black lengths.
Each rope is supplied with a reinforced eye, metal thimble and protective abrasion sleeve. Its UHMWPE construction makes it considerably lighter and easier to deploy than steel wire cable while avoiding the sharp broken strands that can develop on damaged steel cable.
The 10mm diameter is intended for compatible winches whose manufacturer permits a 10mm synthetic line. Before ordering, check the winch specification for the required rope diameter, strength, drum attachment and maximum rope capacity.
The stated 8,600kg figure is the rope’s minimum breaking load. It is not a working load limit, winch rating or recommended recovery load. Rope selection must include an appropriate safety factor and account for every component in the winching system.
Check the drum capacity before selecting the longer rope. Overfilling a winch drum can cause bunching, uneven spooling, rope damage and interference with the winch housing, mounting structure or tie bars.
Synthetic rope is considerably lighter than an equivalent steel wire cable, making it easier to carry, deploy and respool. It also floats on water and does not develop the sharp broken wire strands associated with damaged steel cable.
UHMWPE rope normally stores less energy than steel cable under tension, but it can still recoil or cause injury if it fails. Keep everyone clear of the line of pull, use a suitable winch rope damper and follow safe winching procedures.
Use this rope only with a compatible winch drum and a smooth fairlead suitable for synthetic rope. An aluminium hawse fairlead is commonly used, but every surface contacting the rope must be free from burrs, scoring and sharp edges.
If replacing steel cable, inspect the winch drum and fairlead carefully. Scoring or damage left by steel wire can cut synthetic fibres, so affected components should be replaced or correctly refinished before installing the new rope.
Inspect the rope before and after every use for cuts, pulled fibres, glazing, heat damage, contamination, excessive abrasion and changes in diameter. After use in mud or grit, rinse it with clean water and allow it to dry naturally before respooling it evenly under light tension.
Position the protective sleeve wherever the rope may contact rough ground, rocks or other abrasive surfaces. Replace the rope if significant damage is found or if there is any doubt about its condition.
This rope is intended for pulling and vehicle-recovery applications only. It must not be used for lifting people or loads, overhead lifting or securing a vehicle during transport.
Browse our complete synthetic winch rope range, compare other replacement winch ropes and cables, or find compatible equipment in our winch accessories and spares collection.
This rope qualifies for free next-day delivery on eligible UK orders. Delivery restrictions and additional charges may apply to certain postcode areas; see our delivery information for details.
If you are unsure which length, diameter or rope strength your winch requires, contact the Novawinch UK team or call 0113 288 7766.