NCH30 Hoisting Winch

Novawinch NCH30 Hoisting Winch features:

  • Automatic brakes are hidden inside gearbox and the drum, making for a compact size, compatible with most hoisting systems.
  • Self-adjusting gear design provides winch solid pulling capacity and high efficiency.
  • Differential gear train transmission mechanism design, it has planetary gear’s all features but has smaller size.
  • Use high quality bearing, stable, low energy consumption and low noise.
  • Long working life, low maintenance cost.
  • Meets SAEJ706 standard, as well as CE approval
First layer line pull(lbs/kg) 7200/3265
First layer line speed(fpm/mpm) 49.2/15
Working pressure diff.(psi/MPa) 2350/16
Oil flow supply(l/min) 60
Gear ratio 19.2:1
Wire rope dia.(inch/mm) Φ3/5″/Φ14
Layer 3
Wire rope capacity(ft/m) 125’/42
Valve model NF-120 P1 J1 S1-005
Net weight(without wire rope)(lbs/kg) 485/220

NOTE:

  • Recommended oil flow supply range is 25-90 l/min.
  • One balance valve, one reducing valve as standard, winch must be used in Independent oil supply system which with relief valve.
  • Wire rope out direction please see above figure, DO NOT change direction without permission. Please ask when choosing winch type if need to change wire rope out direction.
  • Hydraulic motor drainage port must be directly connected to oil tank.
  • Hydraulic motor drainage port must be directly connected to oil tank.

Performance

Layer of cable Rated line pull per layer Line speed Wire rope capacity per layer
llbs kg fpm mpm ft m
1 7200 3265 49.2 15 32’ 11
2 6498 2947 54.9 16.6 75’ 25
3 5920 2685 60.7 18.2 125’ 42

You also may be interested